Differences

This shows you the differences between two versions of the page.

--- installation_linux_med [2018/03/09 15:22]
y.audouin
+++ installation_linux_med [2024/02/08 08:23] (current)
b.basic
@@ Line 1: / Line 1: @@
 ====== Installation of MED on Linux ======
-You can download the sources from [[http://files.salome-platform.org/Salome/other/med-3.2.0.tar.gz|here]]
+The MED format is built on top of <color darkorange>HDF5</color> and as such, requires the HDF5 library and tools.\\
 \\
-Unzip it.\\
+After installing HDF5, you can download the MED sources from here [[http://files.salome-platform.org/Salome/medfile/med-4.1.1.tar.gz|here]]
-Then run the following commands:
+\\
-<box round>
+Uncompress them and run the following commands from the uncompressed folder:
-./configure\\
+<code>
-make\\
+./configure CFLAGS=-O2 CXXFLAGS=-O2 FFLAGS=-O2 --disable-python
+make
 sudo make install
-</box>
+</code>
+\\
-If hdf5 is not installed in /usr replace:
+If HDF5 is not installed using your package manager, you need to replace:
-<box round>
+<code>
 ./configure
-</box>
+</code>
-by
+with
-<box round>
+<code>
-<nowiki>./configure --with-hdf5=<path-to-hdf5></nowiki>
+./configure --with-hdf5=<path-to-hdf5>
-</box>
+</code>
-Where ''<path-to-hdf5>'' is the path to your hdf5 installation.\\
+Where <color darkorange><path-to-hdf5></color> is the path to your HDF5 installation.\\
 \\
-If you want to specify where to install the software replace:
+If you want to specify where to install the MED library (required if you don't have sudo rights), replace:
-<box round>
+<code>
 ./configure
-</box>
+</code>
-by
+with
-<box round>
+<code>
-<nowiki>./configure --prefix=<install-path></nowiki>
+./configure --prefix=<install-path>
-</box>
+</code>
-Where ''<install-path>'' is where you want to install it. \\
+\\
-This folder can not be the one containing the sources.
+Where <color darkorange><install-path></color> is the path where you want to install the MED library.\\
+This folder must not be the one containing the sources.